Caprylate production with lactate as electron donor using Megasphaera hexanoica

Please click Download on the upper right corner to see the full description

Electrical Investigation of the Oblique Hanle Effect in Ferromagnet/Oxide/Semiconductor Contacts

We have investigated the electrical Hanle effect with magnetic fields applied at an oblique angle ({\theta}) to the spin direction (the oblique Hanle effect, OHE) in CoFe/MgO/semiconductor (SC) contacts by employing a three-terminal measurement scheme. The electrical oblique Hanle signals obtained in CoFe/MgO/Si and CoFe/MgO/Ge contacts show clearly different line shapes depending on the spin lifetime of the host SC. Notably, at moderate magnetic fields, the asymptotic values of the oblique Hanle signals (in both contacts) are consistently reduced by a factor of cos^2({\theta}) irrespective of the bias current and temperature. These results are in good agreement with predictions of the spin precession and relaxation model for the electrical oblique Hanle effect. At high magnetic fields where the magnetization of CoFe is significantly tilted from the film plane to the magnetic field direction, we find that the observed angular dependence of voltage signals in the CoFe/MgO/Si and CoFe/MgO/Ge contacts are well explained by the OHE, considering the misalignment angle between the external magnetic field and the magnetization of CoFe.Comment: 19 pages, 8 figure

Co-culturing a novel Bacillus strain with Clostridium tyrobutyricum ATCC 25755 to produce butyric acid from sucrose

Background: Currently, the most promising microorganism used for the bio-production of butyric acid is Clostridium tyrobutyricum ATCC 25755(T); however, it is unable to use sucrose as a sole carbon source. Consequently, a newly isolated strain, Bacillus sp. SGP1, that was found to produce a levansucrase enzyme, which hydrolyzes sucrose into fructose and glucose, was used in a co-culture with this strain, permitting C. tyrobutyricum ATCC 25755(T) to ferment sucrose to butyric acid. Results: B. sp. SGP1 alone did not show any butyric acid production and the main metabolite produced was lactic acid. This allowed C. tyrobutyricum ATCC 25755(T) to utilize the monosaccharides resulting from the activity of levansucrase together with the lactic acid produced by B. sp. SGP1 to generate butyric acid, which was the main fermentative product within the co-culture. Furthermore, the final acetic acid concentration in the co-culture was significantly lower when compared with pure C. tyrobutyricum ATCC 25755(T) cultures grown on glucose. In fed-batch fermentations, the optimum conditions for the production of butyric acid were around pH 5.50 and a temperature of 37 degrees C. Under these conditions, the final butyrate concentration was 34.2 +/- 1.8 g/L with yields of 0.35 +/- 0.03 g (butyrate)/g (sucrose) and maximum productivity of 0.3 +/- 0.04 g/L/h. Conclusions: Using this co-culture, sucrose can be utilized as a carbon source for butyric acid production at a relatively high yield. In addition, this co-culture offers also the benefit of a greater selectivity, with butyric acid constituting 92.8% of the acids when the fermentation was terminated.open2

Electrical spin injection and accumulation in CoFe/MgO/Ge contacts at room temperature

We first report the all-electrical spin injection and detection in CoFe/MgO/moderately doped n-Ge contact at room temperature (RT), employing threeterminal Hanle measurements. A sizable spin signal of ~170 k{\Omega} {\mu}m^2 has been observed at RT, and the analysis using a single-step tunneling model gives a spin lifetime of ~120 ps and a spin diffusion length of ~683 nm in Ge. The observed spin signal shows asymmetric bias and temperature dependences which are strongly related to the asymmetry of the tunneling process.Comment: 28 pages, 5 figure

Pneumopericardium as a Complication of Pericardiocentesis

Pneumopericardium is a rare complication of pericardiocentesis, occurring either as a result of direct pleuro-pericardial communication or a leaky drainage system. Air-fluid level surrounding the heart shadow within the pericardium on a chest X-ray is an early observation at diagnosis. This clinical measurement and process is variable, depending on the hemodynamic status of the patient. The development of a cardiac tamponade is a serious complication, necessitating prompt recognition and treatment. We recently observed a case of pneumopericardium after a therapeutic pericardiocentesis in a 20-year-old man with tuberculous pericardial effusion

Thermal spin injection and accumulation in CoFe/MgO/n-type Ge contacts

Understanding the interplay between spin and heat is a fundamental and intriguing subject. Here we report thermal spin injection and accumulation in CoFe/MgO/n-type Ge contacts with an asymmetry of tunnel spin polarization. Using local heating of electrodes by laser beam or electrical current, the thermally-induced spin accumulation is observed for both polarities of the temperature gradient across the tunnel contact. We observe that the magnitude of thermally injected spin signal scales linearly with the power of local heating of electrodes, and its sign is reversed as we invert the temperature gradient. A large Hanle magnetothermopower (HMTP) of about 7.0% and the Seebeck spin tunneling coefficient of larger than 0.74 meV K-1 are obtained at room temperature.1

Strong Bathochromic Shift of Conjugated Polymer Nanowires Assembled with a Liquid Crystalline Alkyl Benzoic Acid via a Film Dispersion Process

We present aqueous dispersions of conjugated polymer nanowires (CPNWs) with improved light absorption properties aimed at aqueous-based applications. We assembled films of a donor???acceptor-type conjugated polymer and liquid crystalline 4-n-octylbenzoic acid by removing a cosolvent of their mixture solutions, followed by annealing of the films, and then formed aqueous-dispersed CPNWs with an aspect ratio >1000 by dispersing the films under ultrasonication at a basic pH. X-ray and spectroscopy studies showed that the polymer and liquid crystal molecules form independent domains in film assemblies and highly organized layer structures in CPNWs. Our ordered molecular assemblies in films and aqueous dispersions of CPNWs open up a new route to fabricate nanowires of low-band-gap linear conjugated polymers with the absorption maximum at 794 nm remarkably red-shifted from 666 nm of CPNWs prepared by an emulsion process. Our results suggest the presence of semicrystalline polymorphs ??1 and ??2 phases in CPNWs due to long-range ??????? stacking of conjugated backbones in compactly organized lamellar structures. The resulting delocalization with a reduced energy bang gap should be beneficial for enhancing charge transfer and energy-conversion efficiencies in aqueous-based applications such as photocatalysis

The 'Harmonizing Optimal Strategy for Treatment of coronary artery stenosis - sAfety & effectiveneSS of drug-elUting stents & antiplatelet REgimen' (HOST-ASSURE) trial: study protocol for a randomized controlled trial

<p>Abstract</p> <p>Background</p> <p>Second-generation drug-eluting stents (DES) have raised the bar of clinical performance. These stents are mostly made from cobalt chromium alloy. A newer generation DES has been developed from platinum chromium alloy, but clinical data regarding the efficacy and safety of the platinum chromium-based everolimus-eluting stent (PtCr-EES) is limited, with no comparison data against the cobalt chromium-based zotarolimus-eluting stent (CoCr-ZES). In addition, an antiplatelet regimen is an integral component of medical therapy after percutaneous coronary intervention (PCI). A 1-week duration of doubling the dose of clopidogrel (double-dose antiplatelet therapy (DDAT)) was shown to improve outcome at 1 month compared with conventional dose in acute coronary syndrome (ACS) patients undergoing PCI. However in Asia, including Korea, the addition of cilostazol (triplet antiplatelet therapy (TAT)) is used more commonly than doubling the dose of clopidogrel in high-risk patients.</p> <p>Methods</p> <p>In the 'Harmonizing Optimal Strategy for Treatment of coronary artery stenosis - sAfety & effectiveneSS of drug-elUting stents & antiplatelet REgimen' (HOST-ASSURE) trial, approximately 3,750 patients are being prospectively and randomly assigned in a 2 × 2 factorial design according to the type of stent (PtCr-EES vs CoCr-ZES) and antiplatelet regimen (TAT vs DDAT). The first primary endpoint is target lesion failure at 1 year for the stent comparison, and the second primary endpoint is net clinical outcome at 1 month for comparison of antiplatelet therapy regimen.</p> <p>Discussion</p> <p>The HOST-ASSURE trial is the largest study yet performed to directly compare the efficacy and safety of the PtCr-EES versus CoCr-ZES in an 'all-comers' population. In addition, this study will also compare the clinical outcome of TAT versus DDAT for 1-month post PCI.</p> <p>Trial registration</p> <p>ClincalTrials.gov number <a href="http://www.clinicaltrials.gov/ct2/show/NCT01267734">NCT01267734</a>.</p

Guidelines for the use and interpretation of assays for monitoring autophagy (3rd edition)

In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. For example, a key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process versus those that measure fl ux through the autophagy pathway (i.e., the complete process including the amount and rate of cargo sequestered and degraded). In particular, a block in macroautophagy that results in autophagosome accumulation must be differentiated from stimuli that increase autophagic activity, defi ned as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (inmost higher eukaryotes and some protists such as Dictyostelium ) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the fi eld understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. It is worth emphasizing here that lysosomal digestion is a stage of autophagy and evaluating its competence is a crucial part of the evaluation of autophagic flux, or complete autophagy. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. Along these lines, because of the potential for pleiotropic effects due to blocking autophagy through genetic manipulation it is imperative to delete or knock down more than one autophagy-related gene. In addition, some individual Atg proteins, or groups of proteins, are involved in other cellular pathways so not all Atg proteins can be used as a specific marker for an autophagic process. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field